Hello everyone. Welcome back to the NumberCruncher Blog. As most of you know, My name is Tom and I am the trainer/support tech here at NumberCruncher. If you need to learn how to do something in the All Order's software, I'm your guy! Remember, if you are struggling with something in the All Order's software, please give us a call @ 866-278-6243. We can set up a training session with you and your company remotely. So make sure you build up those questions and give us a call to set up your session today! That's not what brings me to the blog today. What I would like to talk about today is something that customers ask about all the time, "How do I include employee Costs in BOM's." So sit back and enjoy the read!

Our first step is to create an item that we can put into a BOM. We're going to create a new item called "Labor" (or whatever you would like). This item should either be a non-inventory part, service or other charge group. If you are creating this item in QuickBooks, check the "This service is performed by a Sub-contractor, owner or partner." Next, go to the purchasing tab, enter the cost. The cost should estimate the hourly wages and benefits. Of course, we're going to need to select an income account and an expense account. For income, you can select any of them. For the expense account, create a new account Called "Salaries Applies to Finished Goods". Save and close this item.

Now it is time to include this newly created item in the appropriate Bill of Materials. Go to a finished good item and edit the BOM's. Simply add this item to the component lists. Save and close. Now we can start using this finished good on a work order that will include this new Labor Item's cost.

When you finish a production, the labor cost will be deducted from Salaries Applied to Finished Goods expense and included in the cost of your finished product. Now if the salaries account is greater than the Salaries Applied to Finished Goods, this means that a) you have processed payroll but have not yet finished the product or b) the Cost amount on the item is too low. If the Salaries account is less than the Salaries Applied to Finished Goods this means that either a) you have finished product but have not yet processed payroll or b) the "Cost" amount on the item is too high.

Well, I hope this has cleared any confusion you might have with creating Employee Costs in BOM's. If you still have some question's, place a comment below, and I will answer your question directly. You can also send us an email Support. It's Friday! Take some time to yourself this weekend and get ready for Monday! Enjoy!

TOM

Welcome back to the NumberCruncher blog! I hope everyone is have a great week! Today I would like to talk about an add on to the All Order's software called All Order Mobile. All Order's mobile extends inventory management into your warehouse. This will allow you to increase your efficiency in the warehouse by decreasing mistakes made. All Orders Mobile by NumberCruncher extends inventory management into your warehouse and lets you take full advantage of barcode label printing within All Orders. To me, this add on really makes our inventory system the best inventory software on the market. Just a little bit of background on myself. I use to manage a warehouse. When I was in that field, we didn't have any bar code scanning or a real time inventory management system like All Orders. Which made my job much more difficult. Adding bar coding to your company will save a lot of headaches going forward. Imagine doing your inventory count's on a hand held device, scanning instead of physically counting. I would of gave anything for this system! Now let's talk about All Orders Mobile.

All Orders Mobile by NumberCruncher will make your warehouse operations more efficient! All Orders Mobile is installed on Windows based devices. It can connect wirelessly to your All Orders database and download sales orders to be picked, purchase orders to be received and counts. Once a sales order is picked the picking information will be uploaded in real time back to the All Orders database an automatically create a Ship Doc. Similarly, once a purchase order is received through All Orders Mobile, the information will be uploaded to All Orders and a Reciever will automatically be created. Finally, All Orders Mobile will update your count in All Orders with new quantities.

• Pick Sales Orders
• Receive Purchase Orders
• Perform Inventory Counts
• Find Location/Bins of Inventory
• Move Bins
• Adjust Inventory
• Transfer inventory.

Check out our Intro video on All Orders Mobile by clicking here. We also have more video tutorial's showing how to perform a Sales Order, Receiving a Purchase Order and performing an inventory count.

Well that is all for today! I hope everyone has a great weekend! Make sure to contact us if you have and Questions. support@numbercruncher.com or call us @ 866-278-6243.

Hello, and welcome back to the NumberCruncher Blog! Hope all of you are doing well and you business is thriving! Today I would like to continue to talk about a feature in All Order's called Consignments. I left you guy's hanging last week and only show you how to ship those item's to the customer from the consignment. Today, I am going to tell you how to get some of those item's that didn't sell back in stock from the consignment screen.

So you have sent out those item's now it's time to get some of those back. You will want to create a brand new consignment. Enter the same customer you shipped those item's to. Before I had you enter in the QTY you wanted to ship to the customer in the Ship Doc column. This time you will update the QTY you would like to receive back into All Order's. You can do that by entering the QTY into the Return Column. Once you have entered the necessary qty to be returned, go ahead and go to Activities - Finalize. This will create received doc's for those item's. This process is very similar to what we did last week.

Well, that is all for today. I hope you guy's have a great week! Remember if you have any questions, head over to our website. As always you can always e-mail customer support at support@numbercruncher.com or call us (866) 278-6243.

Hello, and welcome back to the NumberCruncher Blog! Hope all of you are doing well and you business is thriving! Today I would like to talk about a feature in All Order's called Consignments. You might be asking yourself "What is a Consignment?" Consignment is the act of consigning, the act of giving over to another person or agent's charge, custody or care any material or goods but retaining legal ownership until the material or goods are sold. 

We have a perfect feature in our system for this. To start a new consignment, go to Sales - New Consignment. But lets not get ahead of ourselves. Before we get that started, you will want to make sure you set up the default location for the specific customer. You can do that by going to the customer screen, clicking the Shipping Info tab, and selecting that default location. You will want to make sure you set that location to the location where your quantity is. The reason why you have to set that up before is because only those customers with the default location set will appear in the drop down. Ok, back to the consignment. Once you add a customer and a location, all the items in that location will populate. You can use the filter tab to filter for a specific item on the list. This is where you will be able to pick and choose what item to send and how much QTY to send. You will enter this info under the ship doc column. Once you have selected that information, we can go ahead and go to Activities - Finalize. Now a Ship Doc will be created for that customer for those items. Next week, I will talk about how to get those item's that didn't sell back from that customer. Stay tuned!

Well, that is all for today. I hope you guy's have a great weekend! Remember if you have any questions, head over to our website. As always you can always e-mail customer support at support@numbercruncher.com or call us (866) 278-6243.

Welcome back! Hope everyone had a great week! I know some of you guy's that live up north are getting hammered with some pretty intense snow. I feel your pain, I was born and raised is South New Jersey so I know how a snow storm's can destroy a mood. I guess since you guy's will be snowed in all weekend, you might want some good reading material. Well, recently in the past 2 weeks, All Orders has been featured on http://www.intuitiveaccountant.com. They have written a great article about the All Orders program that I would love for you guy's to check out.

That isn't all, All Orders is now on appcenter.intuit.com. Click the link to see an over view of the All Orders program and how it works with Quickbooks. Take a look at our pricing, as you can see we offer training hours based off how many user's. We also include unlimited technical support and software upgrades. To find out more about our program please visit us, NumberCruncher.

Well that is all for today's blog. Make sure you check out those links so you can read up on all our key features! Next week, I will be back talking about some of our smaller features within the All Orders software. Get ready to learn about Lot/Serial #'s on Next weeks Blog! Everyone, if you are getting hit with snowy weather, please be safe out there!. Till Next week! Farewell!

Hello! I hope you and your family had a great holiday! I know I enjoyed my first Florida Christmas! It was great to go to the beach on Christmas day! Anyway, back to things at hand. Last week we talked the basics about bins. Today, I would like to address how to perform a new "Bin Move". A bin move is a great feature and I find a lot of our clients use this frequently. 

If you need to transfer qty from bin to bin, you can use our newest feature called a Bin move. You can start a new bin move from the Warehouse menu – New Bin Move. This will prompted the bin transfer screen. Enter the location and the date of the transfer. There are 2 ways to move your bin quantities, you can move one item at a time or Move an entire bin. To move one item at a time select select that option. This selection will allow you to move a specific item and quantity. Select the bin from and the bin to and select one item, lot/serial #’s and enter the qty to transfer. One note to make, when you select your from bin, the total quantity in the bin (of all items) is listed.

Once you have selected the item, the total quantity for that item in that bin is listed. You can use that to determine the qty that you will transfer. Click add and your entry will be listed below. Repeat the steps for multiple items. The second way is to Move an Entire bin, you can do this by selecting the Move entire bin option. This will move all items and quantities from on bin to another. Select the bin you will transfer from and the bin you will transfer to. The total inventory in that bin will be selected, Click add and it will list all of the items located in that bin.

You can delete the line items that you do not want to transfer by clicking the red X on the line item.

Lastly, you can click Create Transfers and a new Quantity Adjustment screen will open. Remember no quantity is adjusted, you are just moving one bin to another.

In my years of being a Warehouse Supervisor, we had over 200 bins. The inventory warehouse software that we were using at the time did not have a feature like All Orders does. This feature would have made life a lot easier for me. Remember if you have any questions or concern's the NumberCruncher team is here for you. Please give our customer support line a call - (866) 278-6243. You can send us an email also - support@numbercruncher.com. Have a great New Year!! Here's to 2016! Best of luck!

Tom

Hey guy's! Welcome to the NumberCruncher Blog, Thursday Edition! Firstly, Happy Holidays from NumberCruncher team! We hope you and your employees have a great holiday weekend and spend some quality time with your families! Now, in my past 2 blogs we focused on Locations. Now we are going to focus on features within the locations, Bins.

Within the all orders program, we have a unique feature called Bins. This allows you to create a location within locations, allowing you to easily pinpoint the location of the item. If you have a huge warehouse with multiple aisles of product, this would be a key feature for you. A bin does not have to be a physical bin. A bin can be any place of storage, from an actual bin to a shelf or a crate.

For each item that is a Part or an Assembly you can specify a default bin.

When you add items to inventory (Receiving Purchase orders, completing a Work Order) the qty will automatically go into the designated bin. If you leave this area blank, it will go into the default bin. You can change which bin an item is either added to or pulled from on any transaction. You can also split qty between multiple bins in the same location. From the line item of a transaction, click details icon then click bins. Click in any column to enter in the desired bin, and then enter the quantity.

On a transaction where the qty is being decreased aka ship doc and you are not sure which bin the product is on you can click “get available” that will bring up a dialog box.

The bin feature is very useful for your warehouse staff, so make sure you take advantage of the easy to use feature within All Orders. Well, I hope you have learned something from this blog post and again I hope your company can run a little bit smoother. As I always mention, make sure you check out all our support tutorials. Remember if you have any questions or concern's the NumberCruncher is here for you. Please give our customer support line a call - (866) 278-6243. You can send us an email also - support@numbercruncher.com. Hope everyone has a safe and wonderful holiday!

It is no surprise that if you know what your inventory is; when it is coming in and where it is going; you will be better able to serve your customers. Last week, we talked about our Sales Orders module and the ability to connect to purchase orders and automatically fill linked sales orders. Now, let’s think about the capability to track the minutiae of production. There are items to order and receive. There are orders to pack and ship. There are parts that break and need to be replaced and what if an entire batch needs to be recalled? Those are a lot of moving parts to track (pun intended).

Lot and Serial number tracking is available for items that have been purchased, received, used in production and shipped to customers.This function also allows for tracking “items within items.” This makes it easy to find the exact component within a finished product. You also have the functionality to assign serial numbers to items on work orders and shipments to customers. Any serial number with All Orders is easily tracked from warehouse to customer. And if you are looking for all the transactions in which a particular serial number is involved, the All Orders “Find” function is particularly valuable. With the functions of All Orders, you can track the transactional and locational history of anything with an attached serial number.

Wait. You’re saying that you have inventory in multiple warehouses or you want to know how the inventory is moving to a contractor or just track it from your warehouse to a vendor? Don’t you worry, locations are specified on each packing slip and work order that is generated. Paired with the tracking feature for serial and lot numbers, you will always know exactly which warehouse is holding your supplies and shipments. If you want to get even more specific, you can use All Orders’ bin feature. This allows you to label specific storage locations such as shelves, rooms, area, or virtual location for easy retrieval and organization. Much like our serial and lot number tracking of items within items, we have this same feature for storing inventory at a location within a location. Do you outsource any production? All Orders can track that too.

Remember when we talked about generating lot and serial numbers? Well, if you prefer your serial numbers to be in barcode form, All Orders can do that for you. Now, when a shipment comes in or goes out, a simple scan will update your system and keep you on top of the locations and destinations of all products. This is handy for shipping and receiving, since our system allows items to be scanned into the system and updated on the receiving list. It’s a quick way to reduce human error. But if you prefer to enter numbers by hand, and run the risk of a costly input error, that is also an option, just use the listed numbers from the receiving form. But IDK, do you.

All Orders  by NumberCruncher provides solutions for your inventory and order management needs. For more information or to request a free trial, visit our website.